Journey parameters

  • 1
  • 2
  • 3
  • 4
  • 5

Journey parameters

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
Examples of selections
Interpreting the display selected
Vehicle Systems OK
a) Trip log.
Successive display :
  • information messages (passenger airbagOFF etc.) ;
  • operating fault messages (“Check injection” etc.).
7.4 L/100
b) Current fuel consumption.
This value is displayed after a speed of approximately 20 mph (30 km/h) is reached.
5.8 L/100
Average fuel consumption since the last reset.
The value is displayed after having travelled at least 400 metres since the last reset.
112,4 km
c) Mileage recorder : Distance travelled since the last reset.
123.4 km/h
Average speed since the last reset.
The value is displayed after driving 400 metres.
Adjust tyre pressure [press and hold]
d) Reset the tyre pressure.
TYRE PRESSURE LOSS WARNING
16 :30
e) Setting the time.
CLOCK AND OUTDOOR TEMPERATURE
Examples of selections
Interpreting the display selected
On-board computer with mileage-before-service message
Service in
30 000 km / 12 months
f) Service distance.
Mileage before service
With the ignition on and engine not running, access the “Mileage before service” information. When the distance value approaches its limit, there are several possible scenarios :
  • If the range is less than 930 miles (1,500 km) or one month : the message “Service due” is displayed accompanied by the nearest term (distance or time) ;
  • range equal to 0 miles (0 km) or date of service reached : the message “Service Required” is displayed accompanied by the warning light .
The vehicle requires a service as soon as possible.
Service due in
300 km / 24 days
Service Required
Reset : to reset the distance before the next service, press and hold button OK for approximately 10 seconds until the display shows the mileage before service permanently.
NB : if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.
Oil change in
30 000 km / 24 months
f) Service distance.
Mileage before service
With the ignition on and the engine not running, access the mileage information to display the mileage before the next oil change.
Depending on the vehicle, the mileage before an oil change varies according to the driving style (frequent driving at low speed, door-to-door journeys, extensive use at idling speed, towing a trailer, etc.). The distance remaining until the next oil change can therefore decrease more quickly in some cases than the actual distance travelled.
Reset : to reset the distance before the next service, press and hold button OK for approximately 10 seconds until the display shows the mileage before oil change permanently.
NB : if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.