Back to the list


  • 1
  • 2
  • 3
  • 4
  • 5

Position for use

Raise the headrest as far as possible until it locks. Check that it is correctly locked.

To remove the headrest

Raise the headrest as far as it will go, then press button 1 and remove the headrest.

Note: The headrest 2 is fixed and can’t be raised.

To refit the headrest

Fit the rods into their housing and push down the headrest until it locks to set it to raised position. Check that the bonnet is correctly locked.

Folding positions

Press the button 1 and lower the headrest completely.

Fixed headrest 2 for the rear center seat

When the headrest is set at the lowest position, this is for storage only. It should not be in this position when a seat is occupied.

The headrest is a safety component; check that it is fitted and in the correct position.