Back to the list

Bonnet

  • 1
  • 2
  • 3
  • 4
  • 5

Bonnet

To open, pull the handle 1 located on the left-hand side of the dashboard.
WARNING
Before carrying out any operation in the engine compartment, you must switch off the ignition.
WARNING
Avoid placing any pressure on the engine bonnet: risk of the bonnet closing by accident.

Unlocking the bonnet catch

To unlock, push the lever 2 to the left while raising the bonnet.
WARNING
Please note when working close to the engine that it may be hot. The engine cooling fan may also start at any moment. The label in the engine compartment reminds you of this.
Risk of injury.

Opening the bonnet

Raise the bonnet and guide it – the bonnet is held up by two struts 3.
WARNING
When working in the engine compartment, ensure that the windscreen wiper stalk is in the park position.
Risk of injury.

Closing the bonnet

Before closing the bonnet, make sure that nothing has been left in the engine compartment.
To close the bonnet again, hold it in the middle and release it around 30 cm above the closed position.
If necessary, press down along the bonnet to lock completely.
Tip
Never handle the struts when closing the engine bonnet.
WARNING
Ensure that the bonnet is properly locked.
Check that nothing is preventing the catch from locking (gravel, cloth, etc.).
WARNING
After any procedure in the engine compartment, make sure that you do not forget anything (cloth, tools, etc.).
Otherwise, this may lead to engine damage or cause a fire.
WARNING
In the event of even a slight impact involving the radiator grille or bonnet, have the bonnet lock checked by an approved Dealer as soon as possible.