Back to the list

Luggage compartment storage

  • 1
  • 2
  • 3
  • 4
  • 5

Luggage compartment storage

Rear parcel shelf, removal

  • Unhook the two cords 1 from the luggage compartment;
  • lift the shelf 2 to unclip it (movement A);
  • pull the shelf towards you.
To refit, proceed in the reverse order to removal.
WARNING
Do not place any heavy or hard object on the parcel shelf. These may pose a risk to the vehicle occupants if the driver has to brake suddenly or if the vehicle is involved in an accident.

Luggage compartment storage

Mobile floor 1

(depending on the vehicle)
This enables you to compartmentalise the luggage compartment into two separate spaces.
The mobile floor is positioned on the runner 2.
Tip
Maximum weight for the mobile floor: 100 kg evenly distributed.

Transporting objects in the luggage compartment

Always position the objects transported so that the largest surface is against:
  • The back of the rear bench seat, for normal loading (example A).
  • the front seatbacks with the rear seatbacks folded down, as is the case for maximum loads (example B).
Ensure that the objects being transported are evenly distributed throughout the loading area.
If you have to place objects on the folded seat back, it is vital that you remove the headrests before folding the seat back so that it can be folded as flat as possible against the seat.
WARNING
Always position the heaviest items directly on the floor. If the vehicle is equipped, use the lashing points 1 located on the luggage compartment floor. The luggage should be loaded in such a way that no items will be thrown forward and strike the occupants if the driver has to brake suddenly. Fasten the rear seat belts, even if the seats are not occupied.