TOOLS
The tools included in the tool kit A B or C depend on the vehicle.
After use, ensure the tools are correctly stored.
The tool kit B is located in the tray under the spare wheel
The tool kit C is located on the storage compartment wall.
Lever 1
This tightens or releases the tow eye 5.
Jack 2
Fold it correctly before refitting it in its housing (ensure that the wheelbrace is correctly positioned).
Hubcap tool 3
This tool is used to remove the wheel trims.
Wheel bolt guide 4
To finish loosening or starting to tighten the wheel bolts.
Tow eye 5
Wheelbrace 6
Locks or unlocks the wheel bolts and tow eye 5.
Do not leave the tools unsecured inside the vehicle as they may come loose under braking. After use, check that all the tools are correctly clipped into the tool kit, then position it correctly in its housing: risk of injury.
If bolts are supplied with the emergency spare wheel, you must use these bolts only for the emergency spare wheel.
The jack is designed for wheel changing purposes only. Under no circumstances should it be used for carrying out repairs underneath the vehicle or to gain access to the underside of the vehicle.