Back to the list

SLIDING REAR BENCH SEAT

  • 1
  • 2
  • 3
  • 4
  • 5

To move forwards or backwards

To unlock the seat:

- in the rear, lift the two levers 1 simultaneously;

- from the boot, pull the handle 2.

Move the seat forwards or back to the required position.

Release lever 1 or handle 2 and make sure that the seat is locked correctly in position.

When moving the rear seats, ensure that nothing obstructs the anchorage points (passenger’s arm or leg, a pet, gravel, cloth, toys, etc.).

For safety reasons, carry out any adjustments when the vehicle is not being driven.

To fold down the seatback

Ensure that the front seats are far enough forward.

Lower the headrests fully.

Place the seat belts in their guides A.

Lift the handle 3 and lower the seatback B.

To replace the seatback, proceed in the reverse order to removal.

Refit the seatback and click it back into place.

Before moving the seatback, put the seat belt in belt guide A to avoid damaging it.

For safety reasons, carry out any adjustments when the vehicle is not being driven.

The configuration of the two-seat bench with the small seatback B pulled down, does not allow the central seat to be used as it would be impossible to buckle the seat belt (belt buckles inaccessible).

When moving the rear seats, ensure that nothing obstructs the anchorage points (passenger’s arm or leg, a pet, gravel, cloth, toys, etc.).

When refitting the seatback, make sure it is correctly locked in place.

If seat covers are fitted, make sure these do not prevent the seatback latch from locking in.

Make sure that the seat belts are positioned correctly.

Reposition the headrests.