Back to the list

FRONT HEADLIGHTS: changing bulbs

  • 1
  • 2
  • 3
  • 4
  • 5


Direction indicator lights

Turn the bulb holder 1 a quarter of a turn and take out the bulb.

Bulb type: PY21W.

Once the bulb has been replaced, check that it is properly secured.

Dipped beam headlight

To change the bulb:

- remove cover A;

- disconnect the wiring 5 (black lead);

- unclip the spring 2 and remove the bulb.

Bulb type: H1.

Main beam headlight

To change the bulb:

- remove cover B;

- disconnect the wiring 4 (black lead);

- unclip the spring 3 and remove the bulb.

Bulb type: H1.

It is essential to use anti-U.V. 55W bulbs so as not to damage the plastic on the headlights.

Do not touch the bulb glass. Hold it by its base.

When the bulb has been changed, make sure you refit the cover correctly.

The bulbs are under pressure and can break when replaced.

Risk of injury.

The engine may be hot when carrying out operations in close proximity. In addition, the engine cooling fan can come on at any moment.

Risk of injury.

Before performing any action in the engine compartment, the ignition must be switched off by pressing the engine stop button (please see the information on “Starting, stopping the engine” in Section 2).



Front side light

To change a bulb, remove the cover B.

Pull the bulb holder 6 to access the bulb.

Bulb type: W5W.

To comply with local legislation, or as a precaution, you can obtain an emergency kit containing a set of spare bulbs and fuses from an approved dealer.


Daytime running lights 7

Please see an authorised dealer.

Front fog lights 8

- Access the bulb holder via the underneath of the vehicle;

- unclip the flap;

- turn the bulb holder a quarter turn.

Bulb type: H16LL.

Type of bulb for vehicles fitted with cornering lights: H11LL.

Additional lights

If you wish to fit fog lights to your vehicle, please see an authorised dealer.

Any operation on (or modification to) the electrical system must be performed by an approved dealer since an incorrect connection might damage the electrical equipment (harness, components and in particular the alternator). In addition, your Dealer has all the parts required for fitting these units.