REAR AND SIDE LIGHTS: changing bulbs
Side lights/brake and direction indicator lights
Open the boot lid and remove screws 1.
Pull on the outside A of the light and remove the rear light unit.
Remove the bulb holder by releasing clip 2, then clips 3.
Change the bulb.
Refit the bulb holder and push the unit in fully until it locks in place.
Check that the light is properly locked in position.
Tighten screws 1.
|
The bulbs are under pressure and can break when replaced.
Risk of injury.
4 Side light and brake light Bulb type: P21/5W. 5 Direction indicator lights Bulb type: PY21.
|
High-level brake light 6
Consult an approved dealer.
Reversing lights and rear fog lights 7
The front bumper needs to be removed; consult an authorised dealer.
|
Number plate lights 8
- Unclip light 8 by pressing tab 9; - remove the light cover to gain access to the bulb.
Bulb type: W5W.
|
Side indicator lights 10
The wing mirror needs to be removed; consult an authorised dealer.
Bulb type: W5W.
|