Back to the list

SEAT COVERINGS

  • 1
  • 2
  • 3
  • 4
  • 5

Depending on the vehicle, it is possible to remove the seat covers (cleaning, customisation, etc.).

Principle of seat cover removal

Whether it’s for the back or the base, always remove as shown in the picture above A : do not rip the self-grip bands out.

Precautions in use

Once the covers are removed:

- do not use the seats;

- take care with the self-grip bands.

Washing instructions

Follow the washing instructions shown on the seat covers (labels) in particular;

- wash the seat covers separately from other materials;

- spin at a maximum speed of 800 rpm;

- do not wash them more than five times.

Once they are dry, do not fold the seat covers and do not pile them up (they may show marks).

Serious risk of deterioration.

Depending on the vehicle, certain seat covers have markings to show that the front passenger seat has ISOFIX attachments. Make sure when refitting or replacing the seat cover that it has the same markings as the original.

For safety reasons, carry out these operations when the vehicle is stationary.

With the seat covers off, ensure that the seatbelt buckles and ISOFIX attachments are clear.


Front seat

Taking off the seatback cover

- Incline the seatback towards the rear;

- open the zip fasteners 1 and 3 on the seatback;

- remove the self-grip bands 5 between the seatback and the base;

- remove the cover according to the method shown (movement A).

Replacing the seatback cover

- Incline the seatback towards the rear;

- position the cover on the seatback;

- close the zip fasteners 1 and 3;

- attach the self-grip bands 2;

- attach the self-grip bands 5 between the seatback and the base;

Removing the base cover

- Open the zip fastener 4 of the base;

- remove the cover according to the method shown (movement A).

Replacing the base cover

- Position the base cover;

- close the zip fastener 4 for the base;

- attach the self-grip bands 6.




Rear bench seat

- Bring the front seats forward;

- reinsert the headrest for the rear bench seat;

- disengage the seat belts.

Removing the base cover B

- Open the zip fasteners 7 and 8 for the base B;

- remove the cover according to the method shown (movement A).

Replacing the base cover B

- Position the cover on the base B;

- close the zip fasteners 7 and 8;

- attach the self-grip bands 9.

When moving the rear seats, ensure that nothing obstructs the anchorage points (passenger’s arm or leg, a pet, gravel, cloth, toys, etc.).



Removing the seatback cover C

- fold down the seatback C to the base using the stalk 11;

- remove the self-grip bands 15 between the seatback and the base;

- reinsert the seatback C and ensure that it is well locked;

- open the zip fasteners 12 and 14 for the seat back C;

- remove the cover according to the method shown (movement A).

Replacing the seatback cover C

- Position the cover on the seatback C;

- keep the rear central seatbelt out of the way to position the cover;

- close the zip fastener 12 and 14 of the seatback C;

- attach the self-grip bands;

- ensure that the seatback cover is correctly positioned C under the guide of the central seatbelt 10;

- attach the self-grip bands 13;

- slide the lower cover between the seatback C and the base B;

- fold down the seatback C to the base using the stalk 11;

- attach the self-grip bands 15 between the seatbackC and the base B;

- reinsert the seatback C and ensure that it is well locked;

When refitting the seatback, make sure it is correctly locked in place.

If seat covers are fitted, make sure these do not prevent the seatback latch from locking in.

Make sure that the seat belts are positioned correctly.

Reposition the headrests.



Removing the seatback cover D

- Fold down the seatback D to the base using the stalk 16;

- remove the self-grip bands 17 between the seatback and the base;

- open the zip fastener 18 of the seat back D;

- reinsert the seatback D and ensure that it is well locked;

- open the zip fastener 20 of the seat back D;

- remove the cover according to the method shown (movement A).

Replacing the seatback cover D

- Position the cover on the seatback D;

- close the zip fastener 20;

- attach the self-grip bands 19;

- slide the lower cover between the seatback D and the base;

- move the seatback D onto the base using the stalk16;

- close the zip fastener 18 of the seat back D;

- attach the self-grip bands 17 between the seatback and the base;

- raise the seatback D completely and ensure that it is well locked.