CLOCK AND EXTERIOR TEMPERATURE
![](/sites/default/files/uas/eng/BJA-PH2/ud80874_1_1.jpg)
Vehicles fitted with a multimedia screen
The time and exterior temperature are displayed on the multimedia screen 1.
Refer to the multimedia instructions.
![](/sites/default/files/uas/eng/BJA-PH2/ud80874_1_2.jpg)
Vehicles not fitted with a multimedia screen
Press the switch 2 as many times as required to reach the “Settings” world.
Press the control 3 or 4 repeatedly to reach the “Time setting” menu, then press 6 “OK”.
Press and hold the 6 “OK” switch until the time flashes.
Set the time using the control 3 or 4, press 6 “OK” to confirm, then set the minutes using the control 3 or 4, then press 6 “OK” to confirm.
Press the switch 5 to return to the previous menu.
Depending on the vehicle, If the electrical supply is cut (battery disconnected, broken supply wire, etc.), the clock will automatically go back to the right time after a few minutes once the system is capable of receiving information GPS.
External temperature indicator
Special note:
When the external temperature is between -3°C and +3°C, the °C symbols flash (indicates risk of ice).
External temperature indicator
As ice formation is related to climatic exposure, local air humidity and temperature, the external temperature alone is not sufficient to detect ice.