Back to the list
Luggage compartment storage
Luggage compartment storage
Rear parcel shelf
Removal
- Lift the clips 1 using movement A to detach the cables from the luggage compartment door;
- lift the shelf 2 to unclip it (movement B);
- pull the shelf towards you.
To refit, proceed in the reverse order to removal.
WARNING
Do not place any heavy or hard object on the parcel shelf.
These may pose a risk to the vehicle occupants if the driver has to brake suddenly
or if the vehicle is involved in an accident.
Utility version
Unclip the mountings 3 on each side of the parcel shelf, then remove it via the luggage compartment door.
To refit it, proceed in the reverse order to removal.
Luggage compartment storage
Mobile floor 1
Flat position
Enables you to flatten the floor by folding down the back of the rear bench seat and
to compartmentalise the boot into two distinct spaces.
The mobile floor is positioned on the runner 2.
Intermediate position
In the blocked position, it allows you to access the tools stored under the boot carpet.
- Remove the mobile floor 1;
- place it in the luggage compartment, sliding it behind the runner 2.
Tip
Maximum weight for the mobile floor: 100 kg evenly distributed.
Storage position
This allows for more space to store things in the boot.
- Remove the mobile floor 1;
- place it in the luggage compartment underneath the runner 2.
Bag hook 3
Maximum weight per hook: 5 kg.
Transporting objects in the luggage compartment
Always position the objects transported so that the largest surface is against:
- the back of the rear bench seat, for normal loading (example A);
- the front seatbacks with the rear seatbacks folded down, as is the case for maximum loads (example B).
Ensure that the objects being transported are evenly distributed throughout the loading
area.
If you have to place objects on the folded seat back, it is vital that you remove
the headrests before folding the seat back so that it can be folded as flat as possible
against the seat.
WARNING
Always position the heaviest items directly on the floor.
If the vehicle is equipped, use the lashing points 1 located on the luggage compartment floor.
The luggage should be loaded in such a way that no items will be thrown forward and
strike the occupants if the driver has to brake suddenly.
Fasten the rear seat belts, even if the seats are not occupied.