Back to the list
Safe distance alert
Safe distance alert
WARNING
This function is an additional driving aid. This function is not under any circumstances
intended to replace the due care and attention of the driver, who should at all times
be in control of the vehicle.
Using the information from the camera 1, this function informs the driver of the time interval between their vehicle and
the vehicle in front so that a safe stopping distance between the two vehicles can
be maintained.
The function is activated when the vehicle speed is between approximately 19 and 124
mph (30 and 200 km/h).
Location of the camera 1
Make sure the windscreen is not obscured (by dirt, mud, snow, condensation etc.).
Activation/deactivation
Tip
Each time the vehicle is started, the function continues the mode saved the last time
the engine was stopped.
Activation/deactivation from the multimedia screen 2
From the "VEHICLE" world on your multimedia screen 2, press the "DRIVING ASSIST" menu.
Activate or deactivate the "Following dist." function.
Vehicles fitted with a multimedia screen 3
To activate or deactivate the function, refer to the multimedia instructions.
Select "ON" or "OFF".
Activating/deactivating the system from the instrument panel 3
- With the vehicle stationary, press the switch 4 as many times as required to reach the "Settings" world;
- repeatedly press control 5 or 6 to reach the "Vehicle settings" menu. Press the switch 8OK;
- repeatedly press control 5 or 6 to reach the "DRIVING ASSIST" menu. Press the switch 8OK;
- press control 5 or 6 repeatedly to reach the "Distance warning" setting;
- press switch 8OK to activate or deactivate the function:
function activated
function deactivated
Press switch 7 to return to the previous menu.
Operation
With the function activated, the 9 indicator is displayed on the instrument panel and informs the driver of the distance
between their vehicle and the vehicle in front.
- A (grey): function not operational;
- A (green): no vehicle detected;
- B (green): the time interval is greater than or equal to around two seconds (distance between the two vehicles adapted to your speed);
- C (orange): the time interval falls between around 1 and 2 seconds (insufficient distance between the two vehicles);
- D (red): the time interval is less than or equal to around one second (very insufficient distance between the two vehicles).
If the interval between the two vehicles is less than approximately 0.5 seconds, the
indicator light 3, display D, will appear in red on the instrument panel.
Under certain conditions, the time interval may not be displayed:
- while cornering;
- when changing lane;
- if the vehicle in front is sufficiently far or outside the range of the camera.
Warning
WARNING
The measurement is displayed for information: the system does not carry out any action
on the vehicle.
This function is not designed for use in urban conditions or for a dynamic driving
style (sudden cornering, acceleration, braking, etc.), but rather for stable driving
conditions.
The function does not interact with the braking system.
The radar and camera zones must be kept clean and free of any tampering in order to
ensure the proper operation of the system.
Any work in the area where the camera is located (replacements, repairs, windscreen
and/or bumper modifications, etc.) must be carried out by a qualified professional.
WARNING
This function is an additional driving aid. This function is not under any circumstances
intended to replace the due care and attention of the driver, who should at all times
be in control of the vehicle.
System servicing/repairs
- In the event of an impact, the camera alignment may be changed and its operation may consequently be affected. Deactivate the function and consult an authorised dealer.
- Any work in the area where the camera is located (repairs, replacements, windscreen modifications etc.) must be carried out by a qualified professional.
Only an authorised dealer is qualified to service the system.
In the event of system disturbance
- windscreen obscured (by dirt, ice, snow, condensation etc.);
- a complex environment (construction site, road works, etc.);
- poor weather conditions (snow, hail, black ice, etc.);
- poor visibility (night, fog, etc.);
- poor contrast between the vehicle preceding it and the surrounding area (e.g. white vehicle in a snowy area, etc.);
- being dazzled (glaring sun, lights of vehicles travelling in the opposite direction; etc.);
- the road is narrow, winding or undulating (tight bends etc.)
Risk of erroneous false alarms.