Back to the list

Tools

  • 1
  • 2
  • 3
  • 4
  • 5

Tools

The tools included in the tool kit depend on the vehicle.
Tool kit A is located in the tray under the luggage compartment carpet.
Depending on the vehicle, remove the cover B from the tool kit A by sliding it (movement C or D). After use, ensure the tools are correctly stored.
Ensure the correct positioning and locking (movement C or D) of the cover B.

Wheel wrench 1

This can be used to lock or unlock the wheel bolts and the towing eye 5.
WARNING
Do not leave the tools unsecured inside the vehicle as they may be projected during braking. After use, check that all the tools are correctly clipped into the tool kit, then position it correctly in its housing to reduce any risk of injury.
If bolts are supplied with the emergency spare wheel, you must use these bolts only for the emergency spare wheel.

Jack 2

Fold it correctly before refitting it in its housing (ensure that the wheelbrace is correctly positioned).

Hubcap tool 3

This tool is used to remove the wheel trims.

Wheel bolt guide 4

To finish loosening or starting to tighten the wheel bolts.

Tow eye 5

WARNING
For safety reasons, the use of a jack not recommended by the manufacturer is strictly prohibited.
The jack is specific to the vehicle and used to change the wheels. Under no circumstances should it be used:
  • on another vehicle;
  • to carry out a repair;
  • to access the underside of the vehicle.
Risk of injury.
Risk of damage to the vehicle.