Back to the list
My Safety
My Safety
The " My Safety " function can be used to deactivate or activate a set of driving assistance functions
simultaneously.
Depending on the vehicle, you can configure the " My Safety " function from the multimedia screen by selecting the driving assistance functions
to be switched off simultaneously.
Operation
"ALL ON" mode
Depending on the vehicle, the functions and configurations of driving assistance concerned
are:
- lane departure preventionLANE DEPARTURE PREVENTION;
- overspeed sound alert DETECTION OF ROAD SIGNS;
- the road sign detection DETECTION OF ROAD SIGNS;
- the driver vigilance warning DRIVER VIGILANCE WARNING.
When the "ALL ON" mode is activated, the indicator lights on button 1 light up and the "My Safety All ON selected" message appears on the instrument panel to confirm this. The driving aids that are
available in the mode are activated.
“Perso” mode
You can use this mode to deactivate or reactivate certain driving aids that are available in the "All ON" mode previously configured
using the "MY SAFETY PERSO" setting.
With the ignition on, press the switch 1 twice in quick succession. The first time you press it, the "Press again for My Safety Perso" message is displayed on the instrument panel. On the second press, the warning light
on the switch 1 goes out. "Perso" mode is activated. The "My Safety Perso selected" message is displayed on the instrument panel.
To switch back to "ALL ON" mode, press once on the button 1. The indicator light on the button 1 lights up.
Tip
Depending on the length of time following the last time the engine was stopped, the
alerts are reactivated:
- when the vehicle is unlocked;
or
- when a door is opened;
or
- when the engine is restarted.
Configuration of "Perso" mode
From the multimedia screen 2
Refer to the multimedia instructions for information on accessing the settings.