Back to the list


  • 1
  • 2
  • 3
  • 4
  • 5

Vehicles not fitted with a multimedia screen

To access the 3 display for setting the time, press and hold the 1 or 2 switch for a few seconds.

The hour reading flashes. You are now in setting mode, press switch 1 or 2 to set the hour.

Wait a few seconds, the minutes flash: repeatedly press switch 1 or 2 to set them.

When setting is complete, wait a few seconds before changing the display.

Vehicles fitted with a multimedia screen A

The time and exterior temperature are displayed on the multimedia screen A.

Refer to the multimedia instructions.

External temperature indicator

Special note:

When the exterior temperature is - 3°C to + 3°C, the °C characters flash (signalling a risk of ice on the road).

Depending on the vehicle, If the electrical supply is cut (battery disconnected, broken supply wire, etc.), the clock will automatically go back to the right time after a few minutes once the system is capable of receiving information GPS.

External temperature indicator

As ice formation is related to climatic exposure, local air humidity and temperature, the external temperature alone is not sufficient to detect ice.