WIPER BLADES: replacement
Replacing windscreen wiper blades 2
To replace the wipers, first put them in the service positionC.
Ignition switched off:
- set the stalk 1 to position B (fast wiping speed function): the wiper blades will stop in service position C away from the bonnet;
- lift the wiper arm 4;
- turn the blade horizontally (movement G);
- press the tab 3 and slide the wiper blade downwards until the hook 5 on the wiper arm is released (movement D);
- slide the blade (movement E) then lift it (movement F) to release it.
To refit
To refit the wiper blade, proceed in reverse order of removal. Make sure that the blade is correctly locked in position.
To return the blades to lowered position, make sure that the blades are folded down onto the windscreen then set the 1 stalk to position A (off): the windscreen wiper blades will fold into the bonnet when the ignition is switched on.
Replacing the rear screen wiper blade 7
- With the ignition switched off, lift wiper arm 6;
- pivot the blade 7 until some resistance is met;
- pull the blade to release it (movement H).
To refit
To refit the wiper blade, proceed in reverse order of removal. Make sure that the blade is correctly locked in position.
Check the condition of the wiper blades. You are responsible for their service life:
- clean the blades, windscreen and rear screen regularly with soapy water;
- do not use them when the windscreen or rear screen are dry;
- free them from the windscreen or rear screen when they have not been used for a long time.
Before changing the rear wiper blade, make sure the stalk is in the stop position (deactivated).
Risk of injury.
- In frosty weather, make sure that the wiper blades are not stuck by ice (to avoid the risk of the motor overheating).
- Check the condition of the wiper blades.
Replace the wiper blades as soon as they begin to lose efficiency (approximately once a year).
Whilst changing the blade, take care not to drop the arm onto the window after it has been removed as this may break the window.