Back to the list

FOG LIGHTS: changing bulbs

  • 1
  • 2
  • 3
  • 4
  • 5

Front fog lights 1

- Access the bulb holder by releasing flap 2;

- turn the bulb holder a quarter turn;

- remove the bulb.

Type of bulb: H16.

Refitting

To refit, proceed in the reverse order, taking care not to damage the wiring.

Once the bulb has been replaced, check that it is properly secured.

However, we would advise you to have these bulbs replaced by an Approved Dealer.

To comply with local legislation, or as a precaution, you can obtain an emergency kit containing a set of spare bulbs and fuses from an approved Dealer.

The bulbs are under pressure and can break when replaced.

Risk of injury.

Any operation on (or modification to) the electrical system must be performed by an approved Dealer since an incorrect connection might damage the electrical equipment (harness, components and in particular the alternator). In addition, your Dealer has all the parts required for fitting these units.

Please note when working close to the engine that it may be hot. In addition, the engine cooling fan may come on at any moment. The y warning light in the engine compartment reminds you of this.

Risk of injury.