Back to the list

TRIP COMPUTER AND WARNING SYSTEM: journey parameters

  • 1
  • 2
  • 3
  • 4
  • 5

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Examples of selections

Interpreting the display selected

101778 km

a) Total mileage and trip mileage recorder.

112.4 km

Average

b) Journey parameters:

Average fuel consumption.

The value is displayed after having travelled at least 400 metres since the last reset.

5.8 L/100

Current

Current fuel consumption.

Value displayed after reaching a speed of 12 mph (20 km/h), depending on the vehicle.

7.4 L/100

Examples of selections

Interpreting the display selected

Range

b) Journey parameters (continued):

Estimated range with remaining fuel.

The value is displayed after driving 400 metres.

541 km

Distance

Distance travelled since last reset.

522 km

Average

Average speed since the last reset.

The value is displayed after driving 400 metres.

123.4 km/h

55.8 mph (90 km/h)

c) Current speed (depending on the vehicle).

Examples of selections

Interpreting the display selected

On-board computer with mileage-before-service message

d) Service distance.

With the ignition switched on, the engine not running and the display set to “Service Intervals”, press button 2 or 3 for approximately 5 seconds to display the mileage before service (distance or time to the next service). When the distance value approaches its limit, there are several possible scenarios:

- range less than 930 miles (1,500 km) or one month: the message “Service due in” is displayed accompanied by the nearest term (distance or time);

- range equal to 0 miles (0 km) or date of service reached: the message “Service required” is displayed accompanied by the warning light ©.

The vehicle requires a service as soon as possible.

SERVICE INTERVALS

Service in

30 000 Km / 12 mo.

Service due in

300 Km / 24 Days

Service required

Reset: to reset the distance before the next service, press and hold button 2 or 3 for approximately 10 seconds until the display shows the mileage before service permanently.

NB: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.

Examples of selections

Interpreting the display selected

On-board computer with distance before next service message (cntd.)

d) Mileage before service

With the ignition on, the engine not running and the display showing “Service Intervals”, press button 2 or 3 for about 5 seconds to display the mileage before the next service, then press button 2 to view the mileage before the next oil change (distance or time remaining before the next service). When the distance value approaches its limit, there are several possible scenarios:

- range less than 930 miles (1,500 km) or one month: the message “Service due in” is displayed accompanied by the nearest term (distance or time);

- range equal to 0 miles (0 km) or date of oil change reached: the message “Service required” is displayed accompanied by the warning light ©.

The vehicle requires an oil change as soon as possible.

SERVICE INTERVALS

Oil change in

30 000 Km / 12 mo.

Service due in

300 Km / 24 Days

Service required

Depending on the vehicle, the mileage before an oil change varies according to the driving style (frequent driving at low speed, door-to-door journeys, extensive use at idling speed, towing a trailer, etc.). The distance remaining until the next oil change can therefore decrease more quickly in some cases than the actual distance travelled.

Reset: to reset the distance before the next service, press and hold button 2 or 3 for approximately 10 seconds until the display shows the mileage before oil change permanently.

NB: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.

Examples of selections

Interpreting the display selected

e) Reset the tyre pressure.

TYRE PRESSURE MONITORING SYSTEM.

Tyre pressure init. long press

f) Trip log.

Successive display:

- information messages (ESC deactivated/activated, STOP and START activated etc.);

- operating fault messages (check injection system, check airbag, etc.).

No message memorised

g) Estimated range with remaining reagent.

REAGENT TANK.

Top Up AdBlue before 2400 km

Examples of selections

Interpreting the display selected

h) Engine coolant temperature.

i) Clock and outdoor temperature.

Settings

(press and hold)

j) General settings.

Press button 2 or 3 for approximately 5 seconds to select the display language.

Indicates that to access the “General settings” menu, you must stop the vehicle.

Settings

access when the vehicle is stationary

EASY LINK - NAVIGATION