Wheel trim with concealed wheel bolts
Remove the wheel trim using hubcap tool 1, (located in the tool kit) by engaging the hook in the opening near valve 2.
To refit the wheel trim, align it with valve 2. Push the retaining hooks in fully, starting on the side of valve A, followed by B and C, finishing at Dopposite the valve.
Wheel trim 3
Remove using hubcap tool 1 (located in the tool kit) by engaging the hook in the opening near the edge of the trim.
To refit, position the trim attachments facing the wheel attachments and press hard in the middle of the trim to clip it to the wheel.
Central wheel trim with visible wheel bolts
(Wheel trim 4)
The bolts are directly accessible.