DRIVER’S SEAT WITH ELECTRIC CONTROLS
Adjusting the seat squab:
- To adjust the length of the seat base, operate the switch 1.
- To move the seat forwards or back
Move switch 2 forwards or backwards.
- To raise or lower the seat base
Move switch 2 upwards or downwards.
Adjusting the seatback:
To tilt the seatback, move the switch 3 forwards or backwards.
To adjust the seat’s lumbar position
Lower handle 4 to increase the support and lift it to decrease it.
With the ignition on, press the switch 5 for the seat desired. The switch warning lights come on.
The system automatically decides whether or not the heating is needed. Pressing the button again lowers the temperature. Pressing a third time switches the heating off.
For safety reasons, carry out any adjustments when the vehicle is not being driven.
Make sure that the seatbacks are correctly locked in place.
We would advise you not to recline the seatbacks too far to ensure that the effectiveness of the seat belts is not reduced.
No object should be placed on the floor (in front of the driver). such objects may slide under the pedals during sudden braking manoeuvres and obstruct their use.