Back to the list

REAR AND SIDE LIGHTS: changing bulbs

  • 1
  • 2
  • 3
  • 4
  • 5

Side lights and brake lights

Consult an approved Dealer.

Direction indicators 1

Open the boot lid.

From inside the boot, unclip the cover to access the screw 2 then unscrew it.

From the outside, undo the screws 3.

Pull on the outside A of the light and remove the rear light unit.

Turn the bulb holder a quarter of a turn 4.

Remove the bulb.

Bulb type: PY21.

Refit the bulb holder and push the unit as far as it will go, until it locks into place.

Check that the light is properly locked in position.

Tighten screws 3.

Tighten the screw 2 and put the cover back into position.

Reversing lights

From the boot, unclip the cover on the interior trim of the boot lid 5 using a screwdriver or similar tool.

The bulbs are under pressure and can break when replaced.

Risk of injury.

Replace the bulb 6.

Bulb type: H21W.

Refitting

To refit, proceed in the reverse order, taking care not to damage the wiring.

High level brake light 7

Consult an approved dealer.

Rear fog lights 8

The front bumper needs to be removed; consult an authorised dealer.

Bulb type: P21W.

Number plate lights 9

- Unclip the light 9 (using a tool such as a flat-blade screwdriver).

- remove the light cover to gain access to the bulb.

Bulb type: W5W.

The bulbs are under pressure and can break when replaced.

Risk of injury.

Side indicator lights 10

The wing mirror needs to be removed; consult an authorised dealer.

Bulb type: W5W.

CORNERING LIGHTS

REAR LIGHTS