Back to the list


  • 1
  • 2
  • 3
  • 4
  • 5

You must first decide if you want to activate this function.

To activate

With the engine running, press and hold button 1 for about 5 seconds, until you hear two beeps. The indicator light built into the control comes on when the doors are locked.

To deactivate

With the engine running, press and hold button 1 from approximately 5 seconds, until you hear a beep.

Operating principle

When the engine is started, the system automatically locks the doors when the vehicle reaches a speed of approximately 4 mph (7 km/h).

Operating faults

If you notice an operating fault (automatic locking impossible), first check that all doors are correctly locked. If they are correctly locked and the fault is still present, contact an approved Dealer.

Also make sure that locking has not been inadvertently deactivated.

If necessary, refer to the activation procedure.

Driver’s responsibility

If you decide to keep the doors locked when you are driving, remember that it may be more difficult for those assisting you to gain access to the passenger compartment in the event of an emergency.