Depending on the vehicle, remove the tool kit or any tools.
To remove the tool kit 1 from the luggage compartment
If stored behind a flap, open it. Undo the wheel 2 and pull the tool kit towards you.
Repositioning the tool kit
Put the tool kit pin 4 into the hole 3. Fit the kit correctly and tighten the wheel 2.
Repositioning the tools
Put them into their slots. Check everything is correctly positioned.
Do not leave the tools unsecured inside the vehicle as they may come loose under braking. After use, check that all the tools are correctly clipped into the tool kit, then position it correctly in its housing: risk of injury.
If wheel bolts are supplied with the emergency spare wheel, it is imperative that they are used and that they are used for the emergency spare wheel only: refer to the label affixed to the emergency spare wheel.
The jack is designed for wheel changing purposes only. Under no circumstances should it be used for carrying out repairs underneath the vehicle or to gain access to the underside of the vehicle.
The tools included in the tool kit depend on the vehicle.
Hubcap tool 5
To remove the wheel trims.
Screw guide 6
To finish loosening or starting to tighten the wheel bolts.
Tow eye 7
Refer to the information on the “Towing: breakdown” in Section 5.
Wheel brace 8
To undo the wheel bolt and the emergency spare wheel cage nut.
Refer to Section 5 “Changing a wheel”.
After use, reposition the strap making sure that it retains all components in the tool kit.