Back to the list

WHEEL TRIMS - WHEEL

  • 1
  • 2
  • 3
  • 4
  • 5

Wheel trim with concealed wheel bolts

Remove the wheel trim using hubcap tool 1 (located in the tool kit) by engaging the hook in the opening near valve 2.

To refit it, align it with valve 2. Push the retaining hooks in fully, starting with side A near the valve, followed by B and C, finishing at D opposite the valve.

Wheel trim 3

Remove using hubcap tool 1 (located in the tool kit) by engaging the hook in the opening near the edge of the trim.

To refit, position the trim attachments facing the wheel attachments and press hard in the middle of the trim to clip it to the wheel.

Central wheel trim with visible wheel bolts

(Wheel trim 4)

The bolts are directly accessible.

Do not leave the tools unsecured inside the vehicle as they may come loose under braking. After use, check that all the tools are correctly clipped into the tool kit, then position them correctly in their housing.

Risk of injury.