TOOLS
Tool kit storage
The tool kit 1 is located under the flap at the footwell of the front right-hand seat.
Jack 2
Fold it correctly before refitting it in its housing (ensure that the wheelbrace is correctly positioned).
Hubcap tool 3
This tool is used to remove the wheel trims.
Wheel bolt guide 4
To finish loosening or starting to tighten the wheel bolts.
Tow eye 5
Wheelbrace 6
Locks or unlocks the wheel bolts and tow eye 5.
Jack storage position A
Fold the jack away correctly before storing it in its housing. Make sure that the handle is placed correctly in its storage position.
Storage position B in the tool kit 1
Reposition the tools in the casing and check that the assembly is correctly positioned (not doing so may result in noise).
Do not leave the tools unsecured inside the vehicle as they may come loose under braking. After use, check that all the tools are correctly clipped into the tool kit, then position it correctly in its housing: risk of injury.
If bolts are supplied with the emergency spare wheel, you must use these bolts only for the emergency spare wheel.
The jack is designed for wheel changing purposes only. Under no circumstances should it be used for carrying out repairs underneath the vehicle or to gain access to the underside of the vehicle.