Back to the list

HEADLIGHTS: changing bulbs

  • 1
  • 2
  • 3
  • 4
  • 5

Vehicles with halogen headlights

Dipped beam headlights

Remove cover A.

Tilt bulb holder 1 to release it and then replace the bulb.

Type of bulb: H7.

After replacing the bulb, please ensure that the lights are adjusted by a professional.

Main beam headlights

Remove cover B.

Tilt bulb holder 2 to release it and then replace the bulb.

Type of bulb: H7.

Do not touch the bulb glass. Hold it by its base.

It is essential to use anti-U.V. 55W bulbs so as not to damage the plastic on the headlights. Mark the bulb’s position before removal to ensure correct positioning when replacing.

When the bulb has been changed, make sure you refit the cover correctly.

To comply with current legislation, or as a precaution, you can obtain an emergency kit from your approved dealer containing a set of spare bulbs and fuses.

The bulbs are under pressure and can break when replaced.

Risk of injury.

Please note when working close to the engine that it may be hot. The engine cooling fan may also start at any moment. The label in the engine compartment reminds you of this.

Risk of injury.

Daytime running lights, LED front side lights 3

Please see an authorised dealer.

LED direction indicator lights 4

Please see an authorised dealer.

LED headlights

Daytime running lights, LED front side lights 5

Please see an authorised dealer.

LED main beam headlights, dipped beam headlights 6

Please see an authorised dealer.

LED direction indicator lights 7

Please see an authorised dealer.

LED front fog lights 8

Please see an authorised dealer.

Before carrying out any operation in the engine compartment, you must switch off the ignition.

Any operation on (or modification to) the electrical system must be performed by an approved dealer since an incorrect connection might damage the electrical equipment (harness, components and in particular the alternator). In addition, your Dealer has all the parts required for fitting these units.