TOOLS
Tool kit storage
The tool kit 1 is located under the flap at the footwell of the front right-hand seat.
Jack 2 or, depending on the vehicle, 3
Fold it correctly before refitting it in its housing (ensure that the wheelbrace is correctly positioned 4).
Hubcap tool 5
This tool is used to remove the wheel trims.
Wheel bolt guide 6
To finish loosening or starting to tighten the wheel bolts.
Towing hitch 7
Wheelbrace 8
Locks or unlocks the wheel bolts and tow ring 7.
Depending on the vehicle, the wheelbrace can be used to raise or lower the jack 2.
Storage position A in the tool kit 1
Reposition the tools in the casing and check that the assembly is correctly positioned (not doing so may result in noise).
Nothing should be placed around the driver’s feet as such objects may slide under the pedals during sudden braking manoeuvres and obstruct their use.
Do not leave the tools unsecured inside the vehicle as they may come loose under braking. After use, ensure that the tools are correctly placed in their support, positioned correctly in their housing, attach the strap 9, then make sure that the tool kit access flap is properly locked.
Risk of injury.
If bolts are supplied with the emergency spare wheel, you must use these bolts only for the emergency spare wheel.
The jack is designed for wheel changing purposes only. Under no circumstances should it be used for carrying out repairs underneath the vehicle or to gain access to the underside of the vehicle.