Back to the list

Wheel trims, wheel trim – wheel

  • 1
  • 2
  • 3
  • 4
  • 5

Wheel trims, wheel trim – wheel

Wheel trim with concealed wheel bolts

Remove it using the hubcap tool 1 (located in the tool kit) by engaging the hook in the opening near the valve 2.
To refit it, align it with the valve 2. Push the retaining hooks in fully, starting on the side of valve A, followed by B and C, finishing at the side opposite valve D.

Wheel trim 3

Remove it using the hubcap tool 1 (located in the tool kit) by engaging the hook in the opening near the edge of the trim.
To refit, position the trim attachments facing the wheel attachments and press hard in the middle of the trim to clip it to the wheel.

Central wheel trim with visible wheel bolts

(Wheel trim 4)
The bolts are directly accessible.
WARNING
Do not leave the tools unsecured inside the vehicle as they may be projected during braking. After use, check that all the tools are correctly clipped into the tool kit, then position it correctly in its housing.
Risk of injury.