Swivelling partition

  • 1
  • 2
  • 3
  • 4
  • 5

Swivelling partition

To rotate the partition

  • Deactivate the front passenger airbag;
  • set the seat to the flat position FRONT SEATS;
  • unlock the pivoting section of the partition by lifting catches 1 and 2;
  • before pivoting the mobile section, ensure that catches 1 and 2 are in the unlocked position;
  • pivot the moving section 90 degrees, lock it at point 3 and lower the catch 2. Ensure that the catch 2 is locked correctly.
Tip
When handling, ensure that the seat belt does not become damaged.
WARNING
The swivelling section must always be locked when the vehicle is driven.
Risk of injury.
WARNING
For your safety, fasten down any objects transported with the seat in flat-floor position.
WARNING
When using the pivoted partition, the protective net 4 must not be removed or disassembled, even partially.
Risk of injury due to the projection of objects from the rear load area during braking.
Before returning the partition to its initial position, set catches 1 and 2 to the unlocked position.
Return the pivoting section to the initial position, lock catch 2 and then catch 1. Make sure that catches 1 and 2 are locked correctly.
Note: before returning the pivoting section to its initial position, check that the locking points 5 are clean.