Back to the list





Assisted parking
Assisted parking

Using the ultrasonic detectors installed in the vehicle bumper, indicated by the arrows
3, this function helps to find accessible parking spaces and assists in the parking
manoeuvre.
Remove your hands from the steering wheel, you only control:
- the accelerator pedal;
- the brake pedal;
- the gear lever.
At any time, you can regain control by using the steering wheel.
Switching on

With the engine on, the vehicle stationary or driving at less than approximately 19
mph (30 km/h):
- press the switch 2. The switch indicator light 2 lights up and display A appears on the multimedia screen 1;
- set the direction indicator to the side of the vehicle where you want to park.
Special features

Ensure that the ultrasonic sensors indicated by the arrows 3 are not obscured (by dirt, mud, snow, etc.).
Choice of manoeuvre

The system can perform four types of manoeuvre:
- parallel parking;
- perpendicular parking;
- angle parking;
- moving out of a parallel parking space.
From the multimedia screen 1, select the manoeuvre to carry out.
Note: when starting the vehicle, or after having successfully completed parallel parking
using the system, the default manoeuvre proposed by the system is assistance in exiting
a parallel parking space. In other cases, the default manoeuvre can be set from the
multimedia screen 1. Please refer to the multimedia instructions for further information.
Tip
The system start up is accompanied by activation of the Park Assist and, on those
vehicles equipped, the reversing camera to help the driver visualise the manoeuvre
PARKING DISTANCE CONTROL and REVERSING CAMERA.
Operation
Parking
As long as the vehicle speed is less than 19 mph (30 km/h), the system searches for
available parking spaces on the side of the vehicle chosen by the driver.
Note: if parking spaces are available on the other side of the vehicle, set the direction
indicator to the other direction to enable the system to search for spaces.
Once a space has been found, it is displayed on the multimedia screen and indicated
by a small letter "P". Drive slowly, with the direction indicator activated on the side where the space
is available, until the "Stop" message is displayed and a beep sounds.
The space is then indicated on the multimedia screen by a large letter "P".
- Stop the vehicle;
- select reverse gear.
The indicator light
lights up on the instrument panel and a beep sounds.
- Let go of the steering wheel;
- follow the instructions shown on the multimedia screen 1.
Your speed should not exceed around 4 mph (7 km/h).
Once the warning light
on the instrument panel goes off and a beep sounds, the manoeuvre has been completed.
WARNING
This function is an additional driving aid.
Therefore, it can under no circumstances replace the driver's vigilance and responsibility
during manoeuvres (the driver must always be ready to brake).

Exiting a parallel parking space
- Briefly press the switch 2;
- select the "Exit parallel parking space" mode;
- activate the direction indicator on the side on which you wish to exit the vehicle;
- press and hold switch 2 (approximately two seconds).
The indicator light
lights up on the instrument panel and a beep sounds.
- Let go of the steering wheel;
- carry out forward and backward manoeuvres following the instructions shown on the multimedia screen 1 and using the alerts provided by the Park Assist system.
Your speed should not exceed around 4 mph (7 km/h).
Once the vehicle is in a position to exit the parking space, the
warning light disappears from the instrument panel, a beep sounds and a message appears
on the multimedia screen 1 to confirm that the manoeuvre is complete.
WARNING
When manoeuvring, the steering wheel may turn quickly: do not put your hands inside
and make sure that nothing is caught inside.
Suspending/Resuming the manoeuvre

The manoeuvre is suspended in the following cases:
- you take control of the wheel;
- the vehicle is stationary for more than one minute;
- an obstacle in the direction of movement prevents the manoeuvre from being completed;
- the engine stops;
- a door or the luggage compartment is opened.
The switch warning light 2 and the
warning light disappear from the instrument panel and a beep sounds to warn you that
the manoeuvre is suspended. The reason for suspending the manoeuvre will be displayed
on the multimedia screen 1.
Make sure:
- that the vehicle is stationary;
and
- you have let go of the steering wheel;
and
- that all doors and the luggage compartment are closed;
and
- that no obstacles are in the way of the direction of movement;
and
- that the engine is started.
If the switch warning light 2 flashes, this indicates that the system is once again available to resume the manoeuvre.
To resume the manoeuvre, press and hold the switch 2. The switch warning light 2 lights up and the
is displayed on the instrument panel.
Follow the instructions shown on the multimedia screen 1.
Cancelling the manoeuvre
The manoeuvre is cancelled in the following cases:
- the vehicle is too far from the desired parking space;
- the vehicle speed has exceeded 4 mph (7 km/h);
- by pressing the switch 2 or by deactivating from the multimedia screen;
- you have performed more than 14 forwards/backwards movements in one manoeuvre;
- the parking distance control sensors are dirty or obscured;
- a fault with the Park Assist system;
- the vehicle wheels have skidded.
The switch indicator light 2 and the
warning light on the instrument panel disappear and a beep sounds to confirm that
the manoeuvre has been cancelled. The reason for cancelling the manoeuvre will be
displayed on the multimedia screen 1.
Warnings
WARNING
This function is an additional driving aid. This function is not under any circumstances
intended to replace the due care and attention of the driver, who should at all times
be in control of the vehicle. Make sure that the manoeuvre complies with the applicable
traffic regulations in your location.
The driver should always be ready for sudden incidents while driving: always ensure
that there are no small, narrow moving obstacles (such as a child, animal, pushchair,
bicycle, stone, post, towing equipment, etc.) in the blind spot when manoeuvring.
System servicing/repairs
- In the event of an impact, the alignment of the sensors may be changed and their operation may consequently be affected. Deactivate the function and consult an authorised dealer.
- Any work in the area where the sensors are located (repairs, replacements, exterior trim modifications, etc.) must be carried out by a qualified professional.
Only an authorised dealer is qualified to service the system.
In the event of system disturbance
Certain conditions may disrupt or impair operation of the system, such as poor weather
conditions (snow, hail, ice, etc.).
In the event of the system behaving abnormally, deactivate it and contact an authorised
dealer.
Risk of erroneous false alarms.
Limitations of the system operation
- The system cannot detect objects located in the sensor blind spots.
- Always visually check that the parking space proposed by the system is still available and contains no obstacles.
- The system must not be used when towing a trailer or when there is a towing or load carrying system on the vehicle or on surrounding vehicles.