Back to the list

Tools

  • 1
  • 2
  • 3
  • 4
  • 5

Tools

Tool kit storage

The tool kit 1 is located under the flap at the footwell of the front right-hand seat.

Jack 2 or, depending on the vehicle, 3

Fold it correctly before refitting it in its housing (ensure that the handle 4 is correctly positioned).

Hubcap tool 5

This tool is used to remove the wheel trims.

Wheel bolt guide 6

To finish loosening or starting to tighten the wheel bolts.

Tow eye 7

TOWING: BREAKDOWN

Wheel wrench 8

This can be used to lock or unlock the wheel bolts and the towing eye 7.
Depending on the vehicle, the wheelbrace can be used to raise or lower the jack 2.

Storage position A in the tool kit 1

Reposition the tools in the casing and check that the assembly is correctly positioned (not doing so may result in noise).
WARNING
Nothing should be placed around the driver’s feet as during sudden braking such objects may slide under the pedals and obstruct their use.
WARNING
Do not leave the tools unsecured inside the vehicle as they may be projected during braking. After use, ensure that the tools are correctly placed in their support, position them correctly in their housing, attach the strap 9, then make sure that the tool kit access flap is properly locked.
Risk of injury.
If bolts are supplied with the emergency spare wheel, you must use these bolts only for the emergency spare wheel.
WARNING
For your safety, the use of a jack not recommended by the manufacturer is strictly prohibited.
The jack is specific to the vehicle and used to change the wheels.
Under no circumstances should it be used:
  • on another vehicle;
  • to carry out a repair;
  • to access the underside of the vehicle.
Risk of injury.
Risk of damage to the vehicle.