AUTOMATIC LOCKING WHEN DRIVING (RAID)
You must first decide if you want to activate this function.
With the engine running, press and hold button 1 for approximately 5 seconds, until you hear a beep. The indicator light built into the control comes on when the doors are locked.
With the engine running, press and hold button 1 for approximately 5 seconds, until you hear a beep.
When the engine is started, the system automatically locks the doors when the vehicle reaches a speed of approximately 4 mph (7 km/h).
If you notice an operating fault (automatic locking impossible), first check that all doors are correctly locked. If they are correctly locked and the fault is still present, contact an approved Dealer.
Also make sure that locking has not been inadvertently deactivated.
If necessary, refer to the activation procedure.
If you decide to keep the doors locked when you are driving, remember that it may be more difficult for those assisting you to gain access to the passenger compartment in the event of an emergency.