FRONT SEATS WITH ELECTRIC CONTROLS
Adjusting the seat squab:
- To move the seat forwards or back
Move the switch 1 forwards or backwards.
- To raise or lower the seat base
Move the switch 1 up or down.
Adjusting the seatback:
To tilt the seatback, move the switch 2 forwards or backwards.
To adjust the seat’s lumbar position
Lower the handle 3 to increase the support and lift to decrease it.
Make sure that the seatbacks are correctly locked in place.
For safety reasons, carry out any adjustments when the vehicle is not being driven.
Make sure that the seatbacks are correctly locked in place.
We would advise you not to recline the seatbacks too far to ensure that the effectiveness of the seat belts is not reduced.
No object should be placed on the floor (in front of the driver). such objects may slide under the pedals during sudden braking manoeuvres and obstruct their use.
On equipped vehicles, switch 4 grants access to the seats menu on the multifunction screen (please refer to the following pages).
Adjusting the seatback
To tilt the seatback, move the top of switch 5 forwards or backwards.
Adjusting the lumbar support on the driver’s seat
Move the switch 6 forwards, backwards, up or down.
Adjusting the seat position
To move the seat forwards or backwards
Move switch 7 forwards or backwards.
To raise or lower the seat base
Move the back of switch 7 up or down.
Adjusting the seat length
Lift handle 8 to unlock. Release the handle at the desired position and make sure that it is locked.
Make sure that the seatbacks are correctly locked in place.
For safety reasons, carry out any adjustments when the vehicle is not being driven.
Make sure that the seatbacks are correctly locked in place.
We would advise you not to recline the seatbacks too far to ensure that the effectiveness of the seat belts is not reduced.
No object should be placed on the floor (in front of the driver). such objects may slide under the pedals during sudden braking manoeuvres and obstruct their use.
Heated seats
With the ignition on,
- depending on the vehicle pressing the switch 9 or 10 on the required seat for the first time activates the heating system at maximum power.
Both integrated switch warning lights come on;
- a second press decreases the heating to minimum power. One integrated warning light comes on;
- pressing for the third time turns the heating off.
Ventilated seats
Ventilation seats work on the principle of absorbing and exporting the air in the passenger compartment without using the vehicle’s air conditioning and heating functions. For the best performance, you are advised to use this function with air conditioning switched on.
With the ignition on:
- pressing the switch 11 on the required seat for the first time activates the ventilation system at maximum power. Both integrated switch warning lights come on;
- a second press decreases the ventilation to minimum power. One integrated warning light comes on;
- a third press switches off ventilation.
Note: if you switch off the engine and restart it, the ventilation or heating function will be off.