Back to the list

CLOCK AND EXTERIOR TEMPERATURE

  • 1
  • 2
  • 3
  • 4
  • 5

With the ignition on, the time and, depending on the vehicle, the exterior temperature, are displayed on the on-board computer A.

Setting clock A

Display the “clock” page on the instrument panel by pressing one of the buttons on stalk 1.

After 2 seconds, the hours and minutes start flashing.

Press and hold the bottom button to enter the hour setting mode. When they flash on their own, press the top button to scroll through them.

Press and hold the bottom button to enter the minute setting mode. When they flash on their own, press the top button to scroll through them.

Confirm by pressing and holding the bottom button on stalk 1.

Exterior temperature

When the temperature is between -3°C and +3°C, the °C characters flash (indicates risk of ice formation).

If the electrical supply is cut (battery disconnected, broken supply wire, etc.), the clock will lose its time setting. The time must then be set.

For safety reasons, carry out any adjustments when the vehicle is not being driven.

Exterior temperature indicator

As ice formation is related to climatic exposure, local air humidity and temperature, the external temperature alone is not sufficient to detect ice.