Back to the list

POWER TAKE-OFF

  • 1
  • 2
  • 3
  • 4
  • 5

Operating the function

With the vehicle stopped, the engine idling, the gearbox in neutral:

- depress the clutch pedal;

- press switch 1. The indicator light integrated in the switch comes on after about 2 seconds;

- release the clutch pedal. The idle speed increases to 1,200 rpm.

Operating faults

When the indicator light integrated into switch 1 does not come on or the power take-off is not triggered:

- with the clutch pedal depressed, press switch 1 and release the clutch pedal then repeat the procedure;

- or gradually release the clutch pedal.

Switching off the function

- Depress the clutch pedal;

- press switch 1. The indicator light integrated in the switch goes out after about 2 seconds.

When the power take-off is engaged, do not change gear. If it becomes necessary to change gear, you must first disconnect the power take-off.