Back to the list

WHEEL TRIMS

  • 1
  • 2
  • 3
  • 4
  • 5

Wheel trim 2

(concealed wheel bolts)

Remove it using hubcap tool 1 (found in the tool kit), by pushing the hook into the opening located near the valve (to reach the metal retaining wire located behind the wheel trim).

To refit it, align it with the valve. Push the retaining hooks, starting with side A on the valve side, then B and C and finish with the side opposite the valve D.

Central wheel trim 4

(concealed wheel bolts)

Remove it using hubcap tool 1, inserting the tool into the recesses 3 provided.

To refit it, align it with the wheel bolts, clip it in and check it is securely locked.

Wheel trim 5

(exposed wheel bolts)

To remove it without removing the wheel, press it at the points indicated by the arrows.

Turn it so that the retaining brackets holding it in place behind the wheel bolts are released.

To refit the hubcap, proceed in reverse order.

Wheel trim 6

(front wheel only for vehicles equipped with dual wheels)

Remove the nut covers 6 by hand, then remove the wheel trim.