HEADLIGHTS: changing bulbs
Dipped beam headlights
Remove the cover B and unclip the bulb holder 2.
Bulb type: H7LL.
Do not touch the bulb glass. Hold it by its base.
Note: once the bulb has been replaced, ensure the cover is refitted correctly.
Main beam headlights
Remove the cover A and unclip the bulb holder 1.
Bulb type: H1.
Note: once the bulb has been replaced, ensure the cover is refitted correctly.
Direction indicators
Turn the bulb holder 3 a quarter turn to the left.
To refit, turn the bulb holder a quarter turn to the right.
Bulb type: PY21W.
Before carrying out any action in the engine compartment, you must switch off the ignition. STOPPING, STARTING THE ENGINE.
The bulbs are under pressure and can break when replaced.
Risk of injury.
To comply with current legislation, or as a precaution, you can obtain an emergency kit from an approved dealer containing a set of spare bulbs and fuses.
Please note when working close to the engine that it may be hot. In addition, the engine cooling fan may start at any moment. The warning light in the engine compartment reminds you of this.
Risk of injury.
LED side lights/daytime running lights 4
Consult an approved dealer.
Front fog lights5
- Unscrew the wheel arch liner 6 using a screwdriver type tool;
- access the bulb holder located behind the bumper, via the wheel arch liner;
- unscrew the bulb holder.
Type of bulb: H16LL
The bulbs are under pressure and can break when replaced.
Risk of injury.
Any operation on (or modification to) the electrical system must be performed by an approved dealer since an incorrect connection might damage the electrical equipment (harness, components and in particular the alternator). In addition, your Dealer has all the parts required for fitting these units.
To comply with current legislation, or as a precaution, you can obtain an emergency kit from an approved dealer containing a set of spare bulbs and fuses.