Headlight beam adjustment
Headlight beam adjustment
On vehicles fitted with this function, control A allows you to adjust the height of the beams according to the load.
Turn the control A downwards to lower the headlights and upwards to raise them.
Control position
Load status | Control position |
Driver only | 0 |
Driver with two passengers and luggage compartment loaded (1) | 2 |
Driver only with the luggage compartment loaded (1) | 3 |
The table below gives some examples. In all cases, adjust the control A according to the vehicle load so that the road can be seen and other drivers are
not dazzled.
| |
(1) Load status at Maximum Authorised Mass.
When driving on the left in a left-hand drive vehicle (or vice versa), you must adjust
your lights temporarily for the duration of your trip.
The table below gives some examples. In all cases, adjust the control A according to the vehicle load so that the road can be seen and other drivers are
not dazzled.
Temporary adjustment
Open the bonnet and identify the marking B next to one of the front headlight projectors.
For each headlight, use a screwdriver to turn the screw 1 a quarter of a turn towards the "-" symbol to lower the beams.
Return to the original position once your trip is over: turn the screw 1 a quarter of a turn towards the "+" symbol to raise the beams.