REAR LIGHTS AND SIDE LIGHTS: changing bulbs
Rear lights
Depending on the vehicle, remove the protective grilles. Unscrew the two nuts 1 and pull rear light unit A.
Unscrew the bolt 2 using a flat-blade screwdriver or similar to remove the bulb holder 3.
4 Side lights and brake lights
Pear-shaped, bayonet type P21/5W bulb with two filaments.
5 Indicator
Orange pear-shaped, bayonet type PY21W bulb.
6 Reversing light
Pear-shaped, bayonet type bulb P21W.
7 Fog light
Pear-shaped, bayonet type bulb P21W.
The bulbs are under pressure and can break when replaced.
Risk of injury.
High-level brake light
Remove cover 8.
Unscrew the nut.
Remove the unit, from outside the vehicle, to gain access to bulb 9.
Bulb type: W16W.
Number plate lights
Unclip light 10 (using a flat-blade screwdriver or similar).
Remove the light cover to gain access to the bulb.
Bulb type: W5W.
Side indicator lights
Move mirror 11 to access the bolt.
Undo the bolt using a Torx screwdriver.
Take out the indicator light and replace bulb 12.
Bulb type, depending on vehicle: WY5W or W16W.
To comply with current legislation, or as a precaution, you can obtain an emergency kit from an approved dealer containing a set of spare bulbs and fuses.
The bulbs are under pressure and can break when replaced.
Risk of injury.
Clearance lights
Push light 13 (movement B) and press at C to release the light.
Turn the bulb holder a quarter of a turn and replace the bulb.
Bulb type: W5W.