Back to the list

Wheel trims

  • 1
  • 2
  • 3
  • 4
  • 5

Wheel trims

Trim 2

(concealed wheel bolts)
Remove it using hubcap tool 1 by pushing the hook into the opening located near the valve (to reach the metal retaining wire located behind the wheel trim).
To refit it, align it with the valve. Push the retaining hooks in fully, starting on the side of valve A, followed by B and C, ending with the side opposite valve D.

Central wheel trim 4

(concealed wheel bolts)
Remove it using the hubcap tool 1, inserting the tool into the recesses 3 provided.
To refit it, align it with the wheel bolts, clip it in and check it is securely locked.

Wheel trim 5

(exposed wheel bolts)
To remove it without removing the wheel, press it at the points indicated by the arrows.
Turn it so that the retaining brackets holding it in place behind the wheel bolts are released.
To refit the hubcap, proceed in reverse order.

Wheel trim 6

(front wheel only for vehicles equipped with dual wheels)
Remove the nut covers 6 by hand, then remove the wheel trim.