TOOLS
Tool kit
(depending on vehicle)
To access the tool kit 1, raise the luggage compartment carpet and/or mobile floor BOOT STORAGE SPACE AND FITTINGS.
Tool box
(depending on vehicle)
To access the tool box, unlock the mounting(s) 2 by one quarter of a turn, then remove the flap 3.
The tool box is held in place by a strap.
The presence of the tools depends on the vehicle.
Jack 5
On vehicles equipped with a tool kit, push towards the front of the vehicle the 4 clip on the tool kit and remove the jack.
Fold the jack correctly before refitting it in its housing (ensure that the wheelbrace 6 is correctly positioned).
Hubcap tool 7
This tool is used to remove the wheel trims.
Screw guide 8
For tightening/loosening wheel bolts on vehicles fitted with alloy wheels
Towing hitch 9
Wheelbrace 10
Locks or unlocks the wheel bolts and tow eye 9.
Do not leave the tools unsecured inside the vehicle as they may come loose under braking. After use, check that all the tools are correctly clipped into the tool kit, then position it correctly in its housing: risk of injury.
If wheel bolts are supplied in the tool kit, only use these bolts for the emergency spare wheel: refer to the label affixed to the emergency spare wheel.
The jack is designed for wheel changing purposes only. Under no circumstances should it be used for carrying out repairs underneath the vehicle or to gain access to the underside of the vehicle.