Back to the list

FRONT HEADRESTS

  • 1
  • 2
  • 3
  • 4
  • 5

To raise the headrest

Pull the headrest upwards to the desired height. Check that the bonnet is correctly locked.

To lower the headrest

Press button 2 and guide the headrest down to the desired height. Check that the bonnet is correctly locked.

To adjust the angle of the headrest

If your vehicle is thus equipped, move the A section towards or away from you to the required position

To remove the headrest

Raise the headrest to its highest position (tilt the seatback backwards if necessary). Press button 2 and lift the headrest to release it.

To refit the headrest

Check that the headrest rods are clean 1. The rod with a notch should be inserted into the slot 3 fitted with a locking button 2. Insert the headrest rods into the holes (tilt the seatback backwards if necessary). Press the 2 button and push in the headrest as far as it will go, then adjust it to the desired height. Check that each rod 1 on the seatback is securely locked.

The headrest is an important safety component: ensure that it is in place and in the correct position. The distance between your head and the headrest and the distance between the head and section A should be as small as possible.