Back to the list


  • 1
  • 2
  • 3
  • 4
  • 5

Vehicles fitted with a multimedia screen

The time and exterior temperature are displayed on the multimedia screen 1.

Refer to the multimedia instructions.

Vehicles not fitted with a multimedia screen

Press the switch 2 as many times as required to reach the “Vehicle” tab.

Repeatedly press control 3 or 4 to set the 6 clock.

Press and hold switch 5 “OK” until the time display flashes.

Set the hour using control 3 or 4, then press switch 5 “OK” to confirm.

Set the minutes using control 3 or 4, then press switch 5 “OK” to confirm.

If the power supply is cut (battery disconnected, supply wire cut, etc.), the clock must be reset.

We recommend that you do not adjust these settings while driving.

External temperature indicator

Special note:

When the external temperature is between -3°C and +3°C, the °C symbols flash (indicates risk of ice).

Depending on the vehicle, If the electrical supply is cut (battery disconnected, broken supply wire, etc.), the clock will automatically go back to the right time after a few minutes once the system is capable of receiving information GPS.

External temperature indicator

As ice formation is related to climatic exposure, local air humidity and temperature, the external temperature alone is not sufficient to detect ice.