ELECTRIC VEHICLE: charging programming
This function sets the start time for charging.
From the multimedia display 1
(depending on the vehicle)
Programming the function start time
Select “Menu”, “Vehicle”, “Electrical vehicle”, “Charge scheduler”.
You can choose:
- an instant charge start;
- a daily schedule;
- a weekly schedule.
Confirm your choice by selecting “Done”.
Daily
On the menu A, press “Change ” and set the charging start and end times, then press “Select ” to confirm.
Weekly
On the menu B, press “Change” and set the charging start and end times for each weekday, then press “Select ” to confirm.
NB: When the programming is confirmed, the warning light comes on on the instrument panel.
On the instrument panel 2
(depending on the vehicle)
Programming the function start time
You can programme a single time.
- briefly press button C or D to access the menu “PROGRAMMING”;
- press and hold button C or D to confirm;
- briefly press button C or D to access the menu “SETTINGSSTART LOAD”;
- press and hold button C or D to confirm;
- briefly press button C or D to access the clock settings;
- hold down button C or D - the hours flash;
- press buttons C and D to set the hour;
- hold down button C or D to confirm the hour setting;
- the minutes flash - press buttons C and D to set the minutes;
- hold down button C or D to confirm the minutes setting. Your settings are now saved.
NB: When the programming is confirmed, the warning light comes on on the instrument panel.
Charge start
Charging starts at the set time:
- if the ignition is switched off;
- The gear lever should be in position P;
- if the vehicle is connected to a power supply.