Back to the list

FRONT HEADLIGHTS: changing bulbs

  • 1
  • 2
  • 3
  • 4
  • 5

The bulbs detailed below can be replaced. However, we would advise you to have them replaced by an authorised dealer if it proves difficult.

Direction indicators

Unscrew bulb holder 1 a quarter of a turn, then replace the bulb.

Bulb type: PY21W.

Main beam/dipped headlights

Remove cover A.

Unscrew bulb holder 2 and remove the set from its housing.

Disconnect the bulb.

Bulb type: H7.

It is essential to use anti U.V. 55W bulbs so as not to damage the plastic on the headlights.

Do not touch the bulb glass.

When the bulb has been changed, make sure you refit the cover correctly.

During re-assembly, make sure you do not trap the wiring with the bulb holder.

Daytime running lights

Please contact an authorised dealer.

The bulbs are under pressure and can break when replaced.

Risk of injury.

Obtain an emergency kit containing a set of spare bulbs and fuses from an approved Dealer.

Please note when working close to the engine that it may be hot. The engine cooling fan may also start at any moment. The label in the engine compartment reminds you of this.

Risk of injury.

Do not do any work under the bonnet when the vehicle is charging or when the ignition is switched on.