HEADLIGHT BEAM ADJUSTMENT
On vehicles fitted with this function, control A allows you to adjust the height of the beams according to the load.
Turn control A downwards to lower the headlights and upwards to raise them.
For vehicles not fitted with control A, adjustment is automatic.
For manual settings Examples of positions for adjusting control A according to the load | |
|---|---|
0 | Driver alone or with front passenger |
1 | Driver with one front passenger and two or three rear passengers |
2 | Driver with one front passenger, three rear passengers and luggage |
2 | Driver with luggage or load reaching the maximum authorised load weight |
3 | Driver and luggage (reaching the maximum permissible all-up weight) |
4 | Do not use |
The table below gives some examples. In all cases, adjust control A according to the vehicle load so that the road can be seen and other drivers are not dazzled.
If driving on the left in a left-hand drive vehicle (or vice versa), drivers must have the lights adjusted by an authorised dealer for the duration of the trip.