Back to the list

Detection of road signs

  • 1
  • 2
  • 3
  • 4
  • 5

Detection of road signs

The system displays speed limits on the instrument panel according to road signs detected on the side of the road.
It mainly uses information taken from the camera 1 attached to the windscreen behind the rear view mirror. Depending on the country, the system also uses information from a map subscription to interpret certain signs (town entrance, etc.).
The sign displayed on the instrument panel changes when a road sign is detected by the system.
Once the speed limiter or the adaptive cruise control is activated, you can adapt the limited speed setpoint to the speed displayed on the instrument panel using the system (SPEED LIMITERADAPTIVE CRUISE CONTROL).
If the limited speed limit is exceeded, the road sign displayed on the instrument panel is modified to inform the driver.

Location of the camera 1

Make sure the windscreen is not obscured (by dirt, mud, snow, condensation etc.).

Special features

For vehicles with a map subscription:
  • if the vehicle is travelling in a country where the speed units differ from those of the vehicle, the system displays the speed limit sign in the unit of the country, alongside the speed limit converted to the unit used by the vehicle’s instrument panel;
  • for countries where the speed limit is reduced during rainy weather on some types of roads, the system may alter the detected speed limit after a few seconds of the windscreen wipers being activated.
For vehicles without a map subscription: when driving in a country where speed units differ from those on your vehicle, you can manually select the speed unit shown on the instrument panel (e.g. change the unit from miles to kilometres) in order to display accurate information DISPLAYS AND INDICATORS.
Note: the system does not take into account exceptional speed limit measures, such as peak pollution days.

Operation

Warning lights
The function displays the following warning lights:
2.
Additional road signs (start or end of "No overtaking" zone, slip road speed limit, speed in case of a caravan, speed limit with length of application, etc.)
3.
Speed limit road signs (e.g. start of overtaking prohibited zone).
If the speed limit is exceeded, the circle around the panel flashes (indicator light 2) along with a sound signal to warn the driver.
Tip
Map subscription
Road sign detection is associated with a map subscription.
Depending on the equipment, it is necessary to update the maps regularly.
It the maps are not updated, system performance will be impaired (incorrect speed limit, etc.)
Note: If there is no map for a country, a message will appear on the multimedia screen to inform and for downloading the map information relating to the country.
To manage the subscription, please refer to the multimedia instructions.
If there is no subscription, the system will be limited to taking into account the speed limit signs when they are detected by the camera.
The system will no longer take into account information related to the maps. The speed limit availability may be affected.

Activation/deactivation

WARNING
For safety reasons, carry out any adjustments while the vehicle is stationary.
Tip
Depending on the vehicle, depending on the length of time following the last time the engine was stopped, the sound alert is reactivated:
  • when the vehicle is unlocked;
or
  • when a door is opened;
or
  • when the engine is restarted.

Activating, deactivating overspeed sound alerts using the "My Safety" button 4

The sound alert can be deactivated or activated using "Perso" mode in the "MY SAFETY" function.
If the sound alert has previously been deactivated using "Perso" mode:
  • to deactivate the sound alert, press the button 4 twice in succession. The indicator light on the button 4 goes out;
  • to reactivate the sound alert, press the button 4 once. The indicator light on the button 4 lights up.

Activating, deactivating the overspeed sound alert from the multimedia screen 5

To activate or deactivate the alerts, please refer to the multimedia user manual.
Select "ON" or "OFF".

Varying the limit speed

To adapt the speed limiter, cruise control or adaptive cruise control setpoint to the detected speed limit, press the 6 switch.

Temporary unavailability

If the system is unavailable for reasons related to the camera or map data, the symbol or, depending on the vehicle, the symbol is displayed on the instrument panel. If there is still a problem, contact an approved dealer.
The system cannot detect the speed limit if:
  • the windscreen is not clean;
  • the camera is blinded by the sun;
  • there is insufficient visibility (fog, etc.) ;
  • the signs are not legible (snow, etc.) or are hidden (by another vehicle or by trees);
  • map information is not up to date.
Note: when the front camera is obscured, the "Front camera no visibility" message is displayed on the instrument panel. Clean the windscreen area in front of the camera.

Operating faults

When the system detects an operating fault, the or, depending on the vehicle, symbol is displayed on the instrument panel.

Warning

WARNING
This function is an additional driving aid.
This function is not under any circumstances intended to replace the due care and attention of the driver, who should at all times be in control of the vehicle.
The driver should always adapt their speed to the traffic conditions, regardless of the system indications.
The system detects maximum speed limit signs and does not detect other road signs (e.g. entry/exit to/from urban areas, etc.).
The system may not detect all speed limit signs or may interpret them incorrectly.
The driver should not ignore signs that are not detected by the system and should, as a priority, comply with the traffic signage and the highway code.
In the event of poor visibility (fog, snow, frost, etc.), it is possible that the system may not indicate the correct speed to the driver.
The driver should always adapt their speed to the traffic conditions, regardless of the system indications.

speed alert with trafic sign recognition