360° camera

Using information from cameras 1, 2 and 3 located in the front bumper, door mirrors and on the tailgate, as well as ultrasonic detectors 4 located in the vehicle bumpers, the feature assists with difficult manoeuvres (e.g. parking) by displaying the vehicle surroundings.

The cameras transmit four separate views to the multimedia screen 5.

They enable you to view the vehicle surroundings:

The ultrasonic detectors detect obstacles at the front, rear and (depending on the vehicle) side of the vehicle.

Note: make sure that the cameras are not obscured (by dirt, mud, snow, condensation, etc.).

The front camera view is displayed on the multimedia screen 5.

The rear camera view is displayed on the multimedia screen 5.

The "front" or "rear" view transmitted to the multimedia screen 5 is displayed with one or two guidelines 6 and 7.

This system is initially used with the aid of several gauges (mobile for trajectory and fixed for distance).

The fixed gauge includes coloured markers A, B and C indicating the distance behind the vehicle:

This is shown in blue on the multimedia screen 5.

It indicates the vehicle trajectory according to the position of the steering wheel in the front and the rear view.

The bird's eye view is a combined representation from cameras 1, 2 and 3.

It displays a view of the top of the vehicle and its surroundings.

This can be used to confirm a view of the vehicle position in relation to its immediate surroundings (front, rear and side).

The graphic 8 indicates the position of the vehicle. The areas 9 not covered by the cameras are indicated in black.

(depending on the vehicle)

The camera fitted in the door mirror transmits a side view to the multimedia screen 5.

Depending on the vehicle, you can use the multimedia screen to change the bird's eye view to the front side view.

Please refer to the multimedia instructions for further information.

The "Front side view on passenger side" is transmitted to the multimedia screen with fixed guidelines to measure the distances.

Fixed guideline 10 shows the front section of the vehicle.

Fixed guideline 12 shows the vehicle width including door mirrors.

The fixed guidelines 11 are shown in green and dotted.

These are extensions of fixed guidelines 10 and 12.

Depending on the vehicle, you can use the multimedia screen to change the bird's eye view to the front side view.

Please refer to the multimedia instructions for further information.

While the system is activated, if the "Park Assist" function detects one or more obstacles around the vehicle, the indicators 13 light up:

In addition to the audible warning, these indicators show the proximity of obstacles via different colours:

These indicators also show the locations where obstacles are detected, as indicated by their positions in relation to the "Vehicle" symbol.

For more information PARKING DISTANCE CONTROL.

With the ignition switched on, automatic mode is activated when reverse gear is engaged.

The rear view and the bird's eye view appear on the multimedia screen 5.

When the reverse gear is quickly shifted to forward gear, the rear view and bird's eye view are replaced by the front view and bird's eye view on the multimedia screen 5.

Automatic mode is deactivated:

To activate manual mode, with the vehicle stopped and the engine on, press the switch 14: the front view and bird's eye view appear on the multimedia screen.

Manual mode is deactivated:

The fixed guidelines 15 show the distances as closer than they actually are.

The objects shown on the screen are actually further away on the slope.

For example, if the screen displays an object at D, the actual distance of the object is at E.

The fixed guidelines 15 show the distances as further than they actually are.

Therefore, the objects shown on the screen are actually closer on the slope.

For example, if the screen displays an object at G, the actual distance of the object is at F.

Position H seems further than position J on the screen.

However, position H is at the same distance as position K.

The trajectory indicated by the fixed and mobile guidelines do not take into account the height of the object.

So there is a risk that the vehicle may collide with the object when reversing towards position K.

The system is unable to display objects located in certain areas.

In the front or rear view mode, the system cannot be used to view an object in area L.

In bird's eye view mode, the system cannot be used to view a large object in area M (near the edge of the displayed area).

With the ignition on, press the switch 14 or move the selection lever to P position (on vehicles with an automatic gearbox) or to reverse gear (on vehicles with a manual gearbox) in order to use the function.

The function displays different views on the screen according to the gear lever position.

Depending on the vehicle, you can select the "bird's eye view" or "front side view on the passenger side".

If the gear lever is in R position (on an automatic gearbox) or in reverse gear (on a manual gearbox), the following views are available:

or

When shifting from reverse gear to P position (on an automatic gearbox) or to neutral position (on a manual gearbox), the following views are available:

or

When shifting from reverse gear to D position (on an automatic gearbox) or to a gear (on a manual gearbox), the following views are available:

or

The following settings can be modified:

Please refer to the multimedia instructions for further information.

Note: for safety reasons, the views are not displayed in the "Settings" menu while the vehicle is moving.