Levels, filters

This should be checked frequently, and immediately if you notice even the slightest loss in braking efficiency.

The level should be read with the engine switched off and on level ground.

It is normal for the level to drop as the brake shoes become worn, but it must never drop lower than the “MINI" warning line indicated by the '▲ triangle marking' depending on the vehicle.

If you wish to check the disc wear yourself, you should obtain the document explaining the checking procedure from the manufacturer’s network or website.

After any operation on the hydraulic circuit, a specialist must replace the brake fluid.

Only use fluids approved by our Technical Department (and taken from a sealed container).

Refer to the Maintenance Document for your vehicle.

With the engine switched off, open the cap 3. Fill until you can see the fluid, then replace the cap.

Note : check the reservoir level regularly and top up the liquid before taking a trip.

Only use windscreen washer fluid containing antifreeze.

We advise you to consult an authorised dealer or a qualified professional.

Note : do not use pure water (risk of damage to the priming pump, limescale building up on the pump and the jets).

To adjust the height of the windscreen washer jets, please consult an authorised dealer.

The replacement of filter components (air filter, cabin filter, diesel filter, etc.) is scheduled in the maintenance operations for your vehicle.

Replacement intervals for filter elements : refer to the Maintenance Document for your vehicle.