WINDSCREEN WIPER BLADES
Replacing windscreen wiper blades 1
Ignition switched off,
- Lift the wiper arm 2;
- turn blade 1.
- lower the tab 3 by pressing on each side A.
- push the blade forwards B to release the hook 4.
To refit
Proceed in reverse order. Make sure that the blade is correctly locked in position.
- In frosty weather, make sure that the wiper blades are not stuck by ice (to avoid the risk of the motor overheating).
- Check the condition of the wiper blades.
They should be replaced as soon as they become less efficient: approximately once a year.
When changing the blade, when it has been removed, do not let the wiper arm fall against the window: risk of breaking the window.
Check the condition of the wiper blades. You are responsible for their service life:
- clean the blades, windscreen and rear screen regularly with soapy water;
- do not use them when the windscreen or rear screen are dry;
- free them from the windscreen or rear screen when they have not been used for a long time.
Rear screen wiper blade 5
Ignition switched off,
- Lift the wiper arm 5;
- release the blade 6 by pulling it.
To refit
Proceed in reverse order. Make sure that the blade is correctly locked in position.